|
|
|
GReddy Turbine Kits Actuator Type
GReddy Actuator Turbine Kits control the boost by the actuator that opens and shuts the bypass valve. By replacing the stock turbo charger with a properly sized GReddy turbo upgrade kit, you can experience new levels of power.
■GReddy Actuator Turbine Kits are installed by utilizing the factory exhaust manifold.
After adjusting air/fuel and ignition timing, you will be able to feel a significant increase in power and torque.
■For particular cars, GReddy offers several sizes of turbochargers depending on your tuning level.
■NO body modification is required (some cars, body modification is required).
An affordable price and easy installation are compatible.
|
|
GReddy Turbine KitsWaste Gate Type
For real car enthusiasts, GReddy offers true high-performance turbine kits. Equipped with the waste gate valve on the exhaust manifold, the GReddy Waste Gate Turbine Kit controls big power and torque. This turbine kit supports your ideal engine tuning.
■The kits have been using the exclusive stainless exhaust manifold.
GReddy also changes the layout of stock intake pipes.
■NO piping modification is required (some cars, piping modification is required).
The maximum power and torque can be obtained by changing engine parts, intercoolers, and computers.
■GReddy offers many sizes of turbine kits for one car.
Depending on your purpose, you are able to choose turbines from the high response type to the big single turbo.
|
|
GReddy Turbo Kits(Bolt-On)
It takes a tremendous amount of money and time to successfully increase the power of a naturally aspirated engine.
With a GReddy Bolt-On Turbocharger Kit, you can obtain instant horsepower gains with less time and money while still having the potential for upgrading.
■With the small turbo chargers, GReddy dose not reduce the compression ratio for a high response.
■Bolt-On Kit increases power and torque at any RPM.
■With programmed e-manage computers, you do not need to change you computer settings.
(For DC2, the set up of the computer is necessary)
|
|
GReddy Turbo Chargers
With 40 different models to choose from, TRUST\\\'s T-Series turbochargers have an un-beatable selection.
This enables any performance car enthusiast to select a turbocharger that suits their needs.
|
|
GReddy TZ Turbine
To install the TZ turbochargers, you do not need to change factory exhaust manifolds and factory intake pipes.
■Compressors and turbine housings have been developed to fit each engine\\\'s characteristic.
■Our TZ turbines feature the best balance between power and response.
With this turbocharger, you will be active in many fields.
■You will not believe how the power increases from just replacing the stock turbo.
|
|
GReddy Waste Gate Valve
One of the most important components to obtain proper boost control is a right sized waste gate.
The GReddy Waste Gate Valves are used with turbochargers which do not have actuator valves.
The valves are available in 4 types (Type S, Type R, Type C, and Type C High Flow).
To increase the boost, GReddy offers various spring rates (from 0.8km/cm2 to 1.5kg/cm2 and up).
●By changing stock turbochargers into a big turbine, and actuator is not able to release the pressure of exhaust gas properly.
●The GReddy Waste Gate Valves ensure durability and stable boost control.
|
|
GReddy Waste Gate Gaskets
For installation of the GReddy Waste Gate Valves, the Gaskets are available in 3 sizes depending on the type of the Waste Gate Valves.
|
|
GReddy Blow Off Valves
GReddy Blow Off Valves are easily adjustable to prevent both premature boost leakage and compressor surge.
Each is made of durable cast and billet aluminum frame and the valve to diaphragm ratio provides performance that cheap piston types cannot offer.
The spring stiffness adjustment screw and 3 different sizes give the GReddy user the option to match vehicles with mild upgrades to heavily tuned engines.
Also available in an easy to install kit form for many turbocharged vehicles.
|
|
GReddy Blow Off Valve Type-RS ADAPTER KIT
This kit includes everything you need to fit GReddy Blow Off Valve Type-RS to specific vehicle of yours. We have both atmospheric open type and return-to-piping type.
|
|
GReddy Suction Kits
GReddy Suction Kit includes AIRINX and Aluminum Suction Pipes.
The ideal piping layout prevents from intake losses.
The aluminum piping has been buffed up to a mirror finishing for matching The GReddy Intercooler Series.
For specific vehicles, GReddy offers the Suction Kits for Z32 Airflow.
|
|
GReddy Suction Tube
This Suction Tube is included in the GReddy T78/T88 Turbine Kits.
The all Aluminum Suction Tube is built to withstand the high boost pressure.
Increasing the intake efficiency is guaranteed.
|
|
GReddy Intake Plenums
The GReddy Intake Plenums are designed to withstand the large volume of air that enters the manifold when substantial modifications to your engine setup have been made.
Characteristics of Each Intake Plenum
●For S14/S14, the Plenum is the bolt-on replacement type which features a long port.
●For S13, our Plenum has a short port for High RPM.
●With the cross flow ECR33 Plenum, you are able to change the stock throttle into a 90π big throttle valve.
|
|
GReddy Surge Tank Piping Sets
You will need to change the throttle position when you install the GReddy surge tanks to either SR20DET (S13/180SX) or RB26DETT.
Using these pipes enables you to easily put in the surge tanks.
For JZA80, the piping set has been designed for the shortest piping layout from the intercooler to the surge tank.
|
GReddy Surge Tank Gasket
The JZA80 Surge Tank has been specially designed for use with this gasket.
Failing to use this gasket could result in air leakage.
|
|
Metal Intake Manifold Gaskets
Metal Throttle Gaskets
These gaskets have been engineered for the RB26DETT Surge Tank.
Factory gaskets could cause air leakage that will results in faults of engines.
Therefore, GReddy improves materials and seals of the gaskets.
With the GReddy Gaskets, durability and sealing power are guaranteed even at high boost.
If you install the Metal Gaskets, you will not be bothered to scrape the factory gaskets when you will overhaul an engine.
|
|
GReddy Injectors
Heavily tuned engines need stable fuel injection.
The GReddy Injectors are available in 2 types (550cc/720cc)
|
|
GReddy Injector Adaptor
This adaptor has been designed for connecting the GReddy Injectors to 6mm EARL\\\'S hoses and fittings.
High quality is guaranteed with excellent triple O-Rings.
|
GReddy Fuel Delivery Tubes
Safe and efficient fuel delivery is possible with the use of this product.
The stock fuel delivery layout and aftermarket fuel pumps are compatible.
By using high quality O-Rings, this delivery tube relieves your anxiety about fuel leakage.
For RB26DETT engines, TRUST provides 2 types of the tubes depending on the sizes of the injector fittings.
|
Fuel Delivery Tube Sets
Including the Fuel Delivery Tube, 6mm EARL hose, and the adaptor for factory fuel regulators, the Delivery Tube Set allows you to easily replace factory fuel delivery tubes. 2 types are available depending on sizes of injector fittings.
|
GReddy Fuel Regulator Unions
This adaptor has been designed for installing factory regulators or aftermarket fuel regulators to the GReddy Fuel Delivery Tubes.
|
|
GReddy SUS. Turbo Ex. Manifold
All GReddy exhaust manifolds are made from stainless steel mandrel bent pipes.
Main power improvements are made by the design and placement of the collectors to even out the exhaust pulses.
Large primary runners make it a solid choice for your vehicle and a perfect match for GReddy car-back exhaust systems.
|
|
GReddy Turbine Joint Pipes
This joint pipe connects between the exhaust manifold and turbine on a Subaru Impreza EJ20 Engine.
Changing also the manifold allows you to obtain a substantial power increase.
Depending on the model, GReddy offers 2 types of the joint pipes.
|
|
GReddy Extension Front Pipes
For a RB26DETT Twin Turbo T618Z setup is the GReddy Extension Front Pipe.
A 2-1 main and by-pass pipe set (TRUST’s full tuned T618Z RB26DETT engine produced over 700 horsepower).
|
|
GReddy S14 Turbine Outlets
GReddy divides the inside of the outlet into 2 parts to prevent from exhaust losses.
By making the exhaust flow more efficient, the outlet will bring out the hidden potential of turbochargers.
Using the outlet with the GReddy MX Front Pipes brings Turbine\\\'s ability into full play.
|
|
GReddy Actuators
For the GReddy Turbochargers, TRUST provides high quality actuators.
P565 has been setup the pressure level at 0.6kg/cm2.
P765 comes up to 0.9kg/cm2.
(The pressure levels of boost can be varied depending on engines and turbo chargers)
GReddy also offers the actuators for the TZ Turbines as repairing products.
|
|
GReddy Heat Insulators
The GReddy Heat Insulators stop the heat from the GReddy Turbines (Actuator type NOT supported).
The insulators are available in 5 types depending on sizes and directions of turbines.
|
GReddy Turbine Adaptors
This 80Ф Adaptor is installed onto TD07/TD08/T88 turbine\'s exhaust housings for repairing.
|
GReddy Turbine Flange Gaskets
These metal gaskets are used for putting in the GReddy Turbine Flanges.
For various shapes of flanges, GReddy provides 13 types of the gaskets.
The Gasket must be changed once it is taken off.
|
|
GReddy Oil Return Gaskets
GReddy offers 2 types of the gaskets for installing oil return flanges.
The gasket must be changed once it is taken off.
|
GReddy Turbine EX. Housings
For repairing your turbochargers, GReddy supplies various EX. Housings.
Exchanging the EX. Housing will match characteristics of turbochargers with features of engines.
|
GReddy 94Ф Coupling Adaptor Sets
This Adaptor Set connects between the T78/T88 exhaust housing and the front pipe.
The set includes the 94Ф Turbine Couple Adaptor, the 94Ф front pipe coupling, and the coupling band.
The 94Ф front pipe adaptor must be welded onto the front pipe.
|
GReddy Turbine Flanges
This Flange has been specially designed for GReddy Turbine IN and OUT.
For fitting various kinds of the GReddy Turbines, 13 types of the flanges are available.
|
GReddy Oil Inlet Flange
This is a repairing adaptor to put in the TD06H26G/T67 Turbine Oil Inlet.
The adaptor is necessary for re-installing the TD06H 25G/T67 turbines.
|
| Copyright(C) 2009 TRUST-POWER.COM All right Reserved. |
［PAGE TOP］
|
|
|
GReddy Turbine Kits Actuator Type
GReddy Turbine KitsWaste Gate Type
GReddy Turbo Kits(Bolt-On)
GReddy Turbo Chargers
GReddy TZ Turbine
GReddy Waste Gate Valve
GReddy Waste Gate Gaskets
GReddy Waste Gate Flange
GReddy Blow Off Valves
GReddy Blow Off Valve Type-RS ADAPTER KIT
GReddy Blow Off Valve TYPE RZ
GReddy Suction Kits
GReddy Suction Tube
GReddy Intake Plenums
Surge Tank Additional Delivery Sets
GReddy Surge Tank Piping Sets
GReddy Surge Tank Gasket
GReddy Throttle Adaptor
GReddy Throttle Position Sensor Adaptor
Metal Intake Manifold Gaskets
Metal Throttle Gaskets
GReddy Injectors
GReddy Injector Adaptor
GReddy Fuel Delivery Tubes
Fuel Delivery Tube Sets
GReddy Fuel Regulator Unions
GReddy SUS. Turbo Ex. Manifold
GReddy Turbine Joint Pipes
GReddy Extension Front Pipes
GReddy S14 Turbine Outlets
GReddy Actuators
GReddy Heat Insulators
GReddy Turbine Adaptors
GReddy Turbine Flange Gaskets
GReddy Oil Return Gaskets
GReddy Turbine EX. Housings
GReddy 94Ф Coupling Adaptor Sets
GReddy Turbine Flanges
GReddy Oil Inlet Flange
GReddy Turbine Oil Return Flange
|
